Carbon Molecular Sieve (CMS) is the core consumable of PSA nitrogen generators. Once poisoned, it leads to reduced nitrogen output, insufficient gas purity and rising air-to-nitrogen ratio, shortening service life significantly. The five common poisoning causes are water soaking, oil fouling, acid gas corrosion, high-temperature degradation and dust coking. Most operators only spot CMS pulverization while ignoring poisoning as the root cause. This article analyzes symptoms, causes and field solutions for each failure.
|
Type of Poisoning |
Symptoms |
Causes |
Solution |
|
Water Flooding Poisoning |
Lower N₂ purity & output; CMS caking; higher air-nitrogen ratio |
Poor air drying; condensed water or moisture backflow |
Long-time no-load purging; hot air drying; repair pre-drying system |
|
Oil Contamination Poisoning |
Black & sticky CMS; permanent capacity drop; unable for 99.99% high purity |
Compressor oil leakage; failed pre-oil filtration |
Light pollution: high-temperature N₂ regenerationHeavy pollution: replace full CMS and filters |
|
Acid Gas Corrosion Poisoning |
Brittle CMS; more powder; higher tower pressure drop; low N₂ recovery |
Sulfide & acidic gas in raw air erodes carbon structure |
Replace corroded CMS; add activated carbon pre-filter |
|
High-Temperature Degradation Poisoning |
Fragile CMS; failed high-purity nitrogen production; performance decay |
Overheated inlet air (>45℃); poor heat dissipation |
Control inlet temperature at 20–35℃; replace thermally damaged CMS |
|
Dust Coking Poisoning |
High tower pressure difference; blocked pores; reduced gas yield |
Dust and organic residue coking inside micropores |
Screen and regenerate CMS; install intake dust filter |
In short, proper inlet air pretreatment against water, oil, acid and dust is the key to avoid CMS poisoning and keep long-term stable adsorption efficiency. Effective pre-treatment helps maintain consistent nitrogen purity and rated gas output, greatly extending the service cycle of carbon molecular sieve.
Lütfen okumaya devam edin, haberdar olun, abone olun ve düşüncelerinizi bizimle paylaşmanızı bekliyoruz.
telif hakkı
@ 2026 Chizhou Shanli Moleküler Elek Co., Ltd. Her hakkı saklıdır.
AĞ DESTEKLENİYOR
Hi! Click one of our members below to chat on
