Shanli SL-C85 Resin-Based Porous Carbon is a porous carbon material prepared from resin through high-temperature carbonization and activation. It features uniformly distributed micropores, high pore volume, high specific surface area, and zero macroporosity. It will not collapse or deform under pressure, providing stable structural support for silicon deposition.
Ürün No :
SL-C85Nakliye limanı :
Shanghai,Ningbo,Tianjin etc.Kurşun zamanı :
3-5 daysDış görünüş :
Blackşekil :
PowderyPore Volume :
≥0.85cm³/gPore Volume Percentage (0.35-2nm) :
≥85%
SL-C85 the porous carbon carrier for silicon-carbon anode
SHANLI Resin-Based Porous Carbon
SHANLI SL-C85 features uniformly distributed micropores, high pore volume (≥0.85 cm³/g), high specific surface area (≥1800 m²/g), zero macroporosity, and excellent mechanical strength (≥200 MPa), effectively accommodating silicon volume expansion during charge/discharge cycles.
Engineered for silicon-carbon anode lithium-ion battery systems, it provides a stable and reliable carrier solution for next-generation high-energy-density batteries.
Applications of Porous Carbon
| Application Area | Specific Scenario | Key Features |
| Consumer Electronics | Smartphones, Laptops | High energy density for extended battery life, lightweight & thin design, increased cycle life |
| Power Batteries | Electric vehicles, Power tools | High rate capability for fast charge/discharge, increased cycle life, enhanced safety |
| Energy Storage Systems | Home energy storage, Grid frequency regulation | Ultra-long cycle life, cost control, wide temperature adaptability |
| Other Applications (Under Development) | ||
Our Certificates
Caution
1. It should be sealed to avoid of contamination and adsorption of water or other gas and vapors.
2. Storage in a dry warehouse is recommended.
Shanli SL-C85 Resin-Based Porous Carbon is a porous carbon material prepared from resin through high-temperature carbonization and activation. It features uniformly distributed micropores, high pore volume, high specific surface area, and zero macroporosity. It will not collapse or deform under pressure, providing stable structural support for silicon deposition.
Daha fazla göster
Shanli SL-C95 Resin-Based Porous Carbon is a porous carbon material prepared from resin through high-temperature carbonization and activation. It features controllable micropore structure, higher pore volume, higher specific surface area, and zero macroporosity. It will not collapse or deform under pressure, offering ample space and robust structural support for silicon deposition.
Daha fazla göster
Lütfen okumaya devam edin, haberdar olun, abone olun ve düşüncelerinizi bizimle paylaşmanızı bekliyoruz.
telif hakkı
@ 2026 Chizhou Shanli Moleküler Elek Co., Ltd. Her hakkı saklıdır.
AĞ DESTEKLENİYOR
Hi! Click one of our members below to chat on
